|  
Attention
Harley-Davidson customers! Classic Motor Sports
has its own rewards program! Ask about
Rumble Bucks! 
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
FOR 06 DYNA AND 07-08 TWIN CAM- Computer-designed hydraulic cams
- Available from mild street/cruising up to big-bore and race engine build-ups
- Lobe-to-lobe cam profile accuracy for off-idle torque and high-rpm horsepower
- All grinds feature Mikronite finish
- Cams for 06 Dyna and all 07-08 models require the use of 99-04 style valves, seals, valve guides and spring kits (unless noted)
- Sold in sets of two, one intake and one exhaust cam
290-2 HOT STREET PERFORMANCE- Great mid-range and upper end power
- Provides optimum power with 9.5:1 compression ratio and modified heads
- Must use Crane valve springs, set up for .570” lift, performance air cleaner and exhaust
- Power range from 1800 to 5800 rpm
296-2 HOT STREET- For heavily modified engines with a compression ratio of 10.25:1 and up, big bore kit and headwork
- Performance air cleaner and performance exhaust also required
- Designed for use with Edelbrock Performer RPM Twin Cam cylinder heads
- .620” lift, range: 2000 to 6000 rpm
300-2 MILD STREET, CRUISING/TOURING- Bolt-in camshaft; great low-end and mid-range power
- Works well in heavier bikes with performance air cleaner, exhaust and stock compression ratio
- Can be used with stock valve springs
- Power range from idle to 5000 rpm
304-2 MAX HOT STREET- Strong mid-range torque with great upper end power
- Best for modified engines with 10.5:1 compression ratio, big bore kits and modified heads
- Must use Crane valve springs, set up for .700” travel, performance air cleaner and exhaust
- Power range from 2000 to 6200 rpm
310-2 GEAR DRIVE – MODERATE STREET, CRUISING- Bolt-in camshaft; good low-end and mid-range power
- Great for Dynas, Softails and single riders
- Works best with performance air cleaner and exhaust, compression ratios from stock to 9.5:1; stock valve springs okay
- Power range from 1500 to 5500 rpm
316-2 STREET PERFORMANCE- Bolt-in camshaft; 10.1:1 compression ratio recommended
- Works best with performance air cleaner and exhaust
- Can use stock valve springs
- Power range from 1800 to 5800 rpm
NOTE: Must check coil bind, valve to valve clearance and valve to piston clearance.
|
|
|
|
|
|
|
|
|  *************** 2008 Model Year-End Sale *************** Still lots of good riding left this year! *************** Every Remaining In-Stock Motorcycle is now priced to move! *************** Early shoppers will have the best selection so hurry in to pick out your new bike toady!! *************** Have you checked out the GREAT DEALS in our ALL NEW Classic Motor Sports Catalogs? Click here to access our Ebay Store!
| |
|
|
|
